Tabla de contenido
Publicidad
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED
SERVICE PERSONNEL.
PRECAUTIONS FOR USEINSTALLATION
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS
VOLTAGE AND BEFORE ALL OTHER CONNECTIONS HAVE BEEN MADE.
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL
CENTIMETERS AROUND THE UNIT FOR VENTILATION.
TOP COVER ASSEMBLY
1.
PUSH THE METAL BRACKET TO REAR SIDE.
2.
CONNECT THE METAL BRACKET TO THE TOP COVER
3.
CONNECT THE HINGE OF THE TOP COVER TO THE MAIN UNIT
CONNECTION
1.
CONNECT THE POWER CORD (30) TO AC OUTLET AND CONNECT THE SPEAKER
WIRE TO THE SPEAKER TERMINAL (27) LOCATED ON THE REAR SIDE OF UNIT.
2.
SWITCH THE FUNCTION SELECTOR (15) TO " TUNER/CD/PNONO" FUNCTION. IF THE
POWER LED INDICATOR (17) LIGHT UP, IT'S MEAN THE POWER SUPPLY IS NORMAL.
NOW YOUR SYSTEM IS READY TO PLAY THE MUSIC.
LISTENING TO RADIO
MANUAL TUNING
1.
SELECT THE DESIRED BAND BY RADIO BAND SELECTOR (16) (AM OR FM OR FM-STEREO).
2.
TUNE TO THE REQUIRED STATION BY TURNING THE TUNING KNOB (21).
3.
ADJUST VOLUME KNOB (7,8) TO THE DESIRE VOLUME LEVEL.
FM & FM-STEREO RECEPTION
SET THE RADIO BAND SELECTOR (16) AT " FM " POSITION. PROGRAMS ARE
RECEIVED IN MONO MODE. IN PARTICULAR WHEN STEREO SIGNAL ARE WEAK. IT IS
PREFERABLE TO RECEIVE THE PROGRAM IN MONO.
SET THE RADIO BAND SELECTOR (16) AT "FM-ST" POSITION FOR RECEIVING
STEREO PROGRAMS. THE FM-STEREO LED INDICATOR (19) WILL LIGHT UP TO
SHOW FM STEREO PROGRAM IS RECEIVING.
HINTS FOR BEST RECEPTION:-
-
AM : THE RECEIVER HAS A BUILT-IN AM BAR ANTENNA. IF AM RECECPTION IS WEAK,
SLIGHTLY ROTATE OR RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE
AM RECEPTION.
-
FM : THE RECEIVER HAS A BUILT-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET.
THIS WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION.
PLAYING COMPACT DISC
GETTING START
1.
TURN FUNCTION SELECTOR (16) TO SELECT " CD/USB/SD " MODE.
2.
PRESS "OPEN/CLOSE" BUTTON (11) TO OPEN THE CD DOOR (10).
3.
PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE
THE CO DOOR.
4.
FOCUS SEARCH IS PERFORMING, THE LCD DISPLAY (18) WILL SHOW THE TOTAL
NUMBER OF TRACKS & TOTAL PLAYING TIME.
Publicidad
Tabla de contenido
