UFESA TotalChef RK3 Manual De Instrucciones página 34

Robot de cocina multifunción
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
EN
4. Turn the bowl lid until it is locked in position.
5.Put on the steamer.
6.Put the food on the steamer, and then cover the lid.
7.Plug in and press "On/Off" button.
8.Set the speed (01), the time and the temperature you need.
9.Press "Start/Stop" button, the appliance starts to working and the timer is counting down.
10.Sound "Beep" will be heard after the working time is up. All the settings are cleared and the appliance
goes back to stand-by state.
11. After use, turn the main appliance off and remove the steamer lid.
12. Take out the processed food from the steamer.
Caution:
1. Danger of scalding by hot steam and hot condensed water.
2. Never heat up the bowl when it is empty.
3. If the lid is not fitted properly, the steam will escape and food inside steamer will not cook properly.
4. Never leave the measuring cup on the bowl lid when using the steamer.
5. The hot steam and hot condensed water is dangerous. Please handle it carefully.
6. Don't touch the metal part of the bowl while it is hot. Only hold the handle of the bowl to move the
bowl.
7. 30 minutes steam cooking requires 0.5 liter (500ml) of water, you need add around 250ml of water for
each additional 15 minutes.
How to use stirring attachment (Butterfly):
The butterfly will help you to achieve the best results while whisking cream, beating mayonnaise or egg
white.
Install/remove the butterfly (4):
1. Hold the shape end of the butterfly.
2. Insert the butterfly on the upper part of the driving shaft.
Use the butterfly:
Please follow the steps:
1. Install the driving shaft and the butterfly on the bowl.
2. Put the food in the bowl.
3. Then cover the bowl lid.
4. Turn the bowl lid until it is locked in position.
5. Plug in and press "On/Off" button.
6. Set the time and the speed you need. Press "Start/Stop" button, the appliance starts to working and
the timer is counting down. If you skip the timer setting, the timer is counting.
7. Sound "Beep" will be heard after the working time is up. All the settings are cleared and the appliance
goes back to stand-by state.
8. After use, turn the main appliance off. Remove the bowl lid.
9. Take out the processed food from the bowl.
Caution:
1. Only switch on after the butterfly has been positioned into place correctly!
2. Don't add ingredients that might damage or block the butterfly when the blade is in motion and the
butterfly is fitted.
34

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido