Product Specifications - PNI PT949S Manual Del Usuario

EN
A: It is recommended to power Off and On the device after inserting the SD card. Check if the SD card is
under normal service conditions and the format is FAT32. The App shall suggest ""could not find SD card""
under unstable network of the mobile phone or the device.
Q: The device is online and has an alarm event, but the mobile phone cannot receive the information?
A: First confirm that App allows notification in the settings of your mobile phone.
Under normal circumstances, when an anomaly is detected, a message will appear in the notification bar of
your mobile phone. You should set a notification sound or vibration in your mobile phone.
In addition, when viewing real-time video in the App you cannot receive alarm from the surveillance camera
being viewed. Because the device default function the surveillance camera being viewed indicating that the
user is focusing on the monitoring video, and there is no need for an alarm.

9. PRODUCT SPECIFICATIONS

image sensor
Surveillance
camera
Application
High Definition
Video Compression
Video
low illumination
picture/video Capture
Surveillance camera lens
Lens
Illumination
Lamp board
Audio Two-way Speech
Record Mode
Video storage
Record
Wake-up mode
Alarm trigger
Solar panel
Rechargeable batteries
Working Temperature
Humidity
Material
Size / Weight
General
WIFI frequency
Transmission power
Transmission mode
WIFI connection
Reset key
Power supply
1/2,7" CMOS
TUYA Smart / Smart Life
1920 x 1080
Smart H.264
0.1LUX
Support
3.1 mm fixed lens
4 pcs IR Array LED - max 25 m
Support / G.711
Manual record, motion detection record, scheduled record, alarm rec
TF Card ( Max 64 Gb) / Cloud
Call button wake-up, PIR detection wake-up, mobile phone active wake
Alarm recording, screen shot capture
Yes
4 x 18650 batteries included
-26°C up to +80°C
5%--95% non-condensing
ABS for outdoor use
95 X 200 X 73 mm / 931 g
2.4GHz
100mW
P2P, Smart Cloud Server
Sweep QR code
Support
DC 5V 1A
10