Remote Control - Panasonic CS-RE9NKE Instrucciones De Operación

rEMOTE CONTrOL

ANTI-BACTERIAL FILTER
Maximum distances: 8m
press the remote control's button
1 TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2 TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C.
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
3 TO SELECT OPERATION MODE
AUTO mode - For your convenience
• During operation mode selection the power indicator
blinks.
• Unit selects the operation mode according to the indoor
intake temperature and remote control temperature.
HEAT mode - To enjoy warm air
• In heat mode, it may take a while for the unit to warm up.
The POWER indicator blinks during preheating.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
4 TO SELECT FAN SPEED (5 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
10
TO ADJUST AIRFLOW DIRECTION
5
(5 OPTIONS)
AIR SWING
• In COOL mode, if AUTO is set, the louver swing up/down
automatically.
• In HEAT mode, if AUTO is set, the horizontal louver fix at
predetermined position.
6 TO ACHIEVE TEMPERATURE QUICKLY
• This setting enables the desired set temperature to be
(GREEN)
(GREEN) reached quickly.
(ORANGE)
(ORANGE)
7 TO ENJOY QUIET ENVIRONMENT
(GREEN)
(RED)
• This setting provides a quiet environment by reducing the
airflow noise.
• POWERFUL AND QUIET operations can not be activated
at the same time.
PRESS TO RESTORE THE REMOTE CONTROL'S
8
DEFAULT SETTING
9 NOT USED IN NORMAL OPERATIONS
1
4
7
9
remote control display
3
2
5
6
8