Connecting Other Devices - Marley ONE FOUNDATION BT Manual De Instrucciones

CONNECTING YOUR DEVICE VIA BLUETOOTH
PAIRING MODE (BLINKING BLUE LED)
One Foundation automatically goes into Bluetooth
Reconnect Mode for 10 seconds as soon as you turn it
on (fast flashing BLUE led). It then switches to Pairing
Mode (slow flashing BLUE led). You can pair a new
device to One Foundation when in Pairing Mode.
NOTE: Holding the on the One Foundation remote
for 3 seconds will disconnect the device currently
connected and put One Foundation into Pairing Mode.
Pairing mode can also be engaged by disconnecting a
connected device or by pressing the Pair on the back
of One Foundation.
CONNECTED MODE (SOLID BLUE LED)
Use your Bluetooth-enabled device to pair to One
Foundation. One Foundation does not require a pairing
password. Once paired, the LED will glow solid blue.
NOTE: One Foundation will automatically pair with the
last device connected to it when turned ON (when the
device is available).

CONNECTING OTHER DEVICES

®
The various inputs on the back and right side of One
Foundation allow you to connect other devices to the
system.
• For connecting analog devices, use the RCA input on
• For connecting digital devices we recommend using
USB CHARGING PORT
Use this port for charging up your iPod®, smartphone,
or tablet. The port is always active when One
Foundation is plugged into a wall outlet.
the back or the auxiliary input on the side.
the digital audio (optical) input for the highest sound
quality.