Ingersoll Rand 1 Serie Manual De Operación Y Mantenimiento página 2

•
Keep others a safe distance from your work area, or ensure
they use appropriate Personal Protective Equipment.
•
This tool is not designed for working in explosive environ-
ments, including those caused by fumes and dust, or near
flammable materials.
•
This tool is not insulated against electric shock.
•
Be aware of buried, hidden or other hazards in your work
environment. Do not contact or damage cords, conduits,
pipes or hoses that may contain electrical wires, explosive
gases or harmful liquids.
•
Keep hands, loose clothing, long hair and jewelry away
from working end of tool.
•
Power tools can vibrate in use. Vibration, repetitive
motions or uncomfortable positions may be harmful to
your hands and arms. Stop using any tool if discomfort,
tingling feeling or pain occurs. Seek medical advice before
resuming use.
•
Keep body stance balanced and firm. Do not overreach
when operating this tool. Anticipate and be alert for sud-
den changes in motion, reaction torques, or forces during
start up and operation.
•
Tool and/or accessories may briefly continue their motion
after throttle is released.
•
To avoid accidental starting - ensure tool is in "off" posi-
tion before applying air pressure, avoid throttle when car-
rying, and release throttle with loss of air.
•
Ensure work pieces are secure. Use clamps or vises to hold
work piece whenever possible.
•
Do not carry or drag the tool by the hose.
The use of other than genuine Ingersoll-Rand replacement parts may result in safety hazards, decreased tool
performance, and increased maintenance, and may invalidate all warranties.
Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll-Rand Authorized
Servicenter.
WARNING
Always wear eye protection
when operating or performing
maintenance on this tool.
Using the Tool (Continued)
•
•
•
•
•
•
•
•
•
•
•
•
WARNING SYMBOL IDENTIFICATION
WARNING
Read this manual before
operating tool.
2
Do not use power tools when tired, or under the influence
of medication, drugs, or alcohol.
Never use a damaged or malfunctioning tool or accessory.
Do not modify the tool, safety devices, or accessories.
Do not use this tool for purposes other than those recom-
mended.
Use accessories recommended by Ingersoll-Rand.
When a suspension device is used, ensure that it is securely
fastened.
Be aware of the risk of crushing between the tool or reac-
tion bar and a fixed object or workpiece, caused by torque
reaction.
Anticipate the torque reaction developed when the drill bit
snags or binds, which occurs when breaking through the
material being drilled or when heavily loaded. If snags or
binds, release the trigger and remove the drill bit from the
workpiece by rotating it in the reverse direction.
When support handle, or other means, is provided with a
high torque tool it should be used to minimize the hazard
due to the reaction torque.
Do not use any drill bits or other accessory having a maxi-
mum operating speed less than the free speed of the drill in
which it is being used.
Securely tighten drill bits or other accessories in the chuck
before operating the drill. When using a chuck key, remove
it before starting the drill.
For reversible models, note the position of the reversing
mechanism before operating the tool so as to be aware of
the direction of rotation when operating the throttle.
WARNING
Always wear hearing
protection when operating
this tool.