Fermax bruto Serie Manual De Instrucciones página 2

TELECAMERA
M O D U L E
Cod.94161 V07/03
The telecamera module for FERMAX vandal-
resistant panels is necessary for every video-door
entry system.
This module is manufactured with CMOS
technology, includes a 3.6mm wide angle optic,
infrared led matrix for night use and Pan & Tilt (see
detail).
MODULE INSTALLATION
¡DO NOT INSTALL THIS MODULE BEFORE THE
PUSHBUTTONS MODULES HAVE
INSTALLED!
Insert the telecamera mo-
dule in window and push
down both sides manually
until a 'clic' is heard.
¡THE TELECAMERA MODU-
LE MUST BE INSERTED
WITHOUT ANY TOOL!
MODULE CONNECTION
The telecamera module allows to connect the wires
needed comfortably, by means of its removable
connectors.
The Test Connector is another interesting feature built
in the telecamera: once it has been connected, if the
female connector in the monitor is plugged into the
telecamera the image appears automatically in the
monitor. This allows to test the right operation of both
devices.
BEEN
Monitor and Telecamera Test detail