Ooni Pro Manual página 44

Lighting & extinguishing -
Wood or charcoal
Uuni Pro comes with a wood and charcoal burner as a standard. Only use charcoal
that is suitable for cooking and do not cook food until the fuel has a coating of ash.
When cooking with wood, use pieces of dry, non-treated hardwood (up to 25cm
(10") long and 4cm (1.5") in diameter) in the burner.
To light your Uuni Pro with either wood or charcoal:
Remove the chimney cap, open the chimney and ceiling vents and attach required
door.
Remove the hatch and place a layer of charcoal or a small stack of wood in the char-
coal/wood burner. Use a gas blowtorch or a natural fire-lighter to light the wood.
Once there is a fire going, slowly add more fuel. Replace the hatch and leave Uuni Pro
to preheat for 20-40 minutes. Add more fuel as needed.
Do not use spirit or petrol for lighting or re-lighting. Use only fire-lighters complying
to EN 1860-3.
To extinguish
Let the fire burn down naturally and leave Uuni Pro to cool. Do not remove ashes until
Uuni Pro has cooled completely.
Always wear supplied gloves when using Uuni Pro.
WARNING:
This barbecue will become very hot. Do not move it during operation.
Do not use indoors.
Do not use spirit or petrol for lighting or re-lighting. Use only firelighters complying
to EN 1860-3.
Keep children and pets away.
42