Mounts; Other Accessories - Makita SKR301 Instrucciones De Uso

6.3 Mounts

6.3.1 Universal mount
The universal mount can be used as a wall
mount and for vertical setups on a tripod. It
features sturdy, all-metal construction, with a
springactivated mechanism that allows you
to easily change height for quick set-ups.
Also, it has a fine adjustment screw on the
bottom for precise positionings.
• As a wall mount, it can be attached to a grid for
suspended ceiling setup.
• The Mount can also be used on its side and attached
to a tripod (5/8-11) to hold the laser in the vertical position.
6.3.2 Grade mount
Adjustable grade mount is used to lay out inclined planes, such as
cathedral ceilings. Laser must be in manual mode when using the
Grade mount.
6.3.3 Tripods
The laser can be mounted on a 5/8-11 flat head tripod. You can
also use a tripod with an elevating column to adjust the height of
the laser.

6.4 Other accessories

Universal mount
• Laser-enhancing glasses
improve the visibility of the laser
beam in bright light conditions.
• CB60 red magnetic target
improves the visibility of the
laser beam in bright conditions.
Quickly attaches to any metallic surf a c e .
18
SKR301
LASER AUTOMATIQUE
Manuel d'Utilisation