Conceptronic C54BRS4A Guía De Instalación Rápida página 31

ENGLISH
5. Configure the C54BRS4A for your broadband connection
5.1 Factory Default Settings of the C54BRS4A
The C54BRS4A is preconfigured with several settings. The preconfigured settings can be found below:
IP Address
Username
Password
WAN Connection
WiFi SSID
WiFi Channel
WiFi Security
UPnP
When you have changed settings in the configuration of the C54BRS4A, they will be saved to the memory
of the router. To restore the factory default settings, press and hold the reset button on the back of the
device for +/- 15 seconds.
5.2 Web-based Configuration
The configuration of your C54BRS4A is web based. You will need a web browser for the configuration of
the device.
Note: For configuration of the router it is advised to use a LAN Cable connection to the device instead
of a Wireless connection.
A. Start your web browser (like: Internet Explorer, FireFox or Safari).
B. Enter the IP address of the device in the address bar of your web browser (By default:
http://192.168.0.1/).
The Login page of the C54BRS4A will be shown.
C. Enter the Username and Password (Default: 'admin' & 'admin') and click "Submit" to enter the
configuration pages.
: 192.168.0.1 (DHCP Server for LAN/W-LAN clients Enabled)
: admin (small characters)
: admin (small characters)
: Dynamic IP – DHCP Client (used by most cable providers)
: C54BRS4A
: Channel 6
: Unsecured
: Enabled
C
31
C