Description Of The Components - Melchioni Family FASTER Folleto De Instrucciones

DESCRIPTION OF THE COMPONENTS

1. Vacuum cleaner switch button
2. Battery pack
3. Dust container
4. Connection to the motor body
5. Extension tube
6. Connection to the brush
7. Motorized brush
INSTALLATION OF THE COMPONENTS
1) Installation of accessories to the body
Hook the extension tube onto the motor body until you hear a "click" blocking sound.
To remove the extension tube, press the central locking button.
2) Connection of the electric brush
Hook the brush to the tube and press firmly until you hear the "click", then the installation is complete
To remove the brush, press the central lock button.
USE
RECHARGE THE APPLIANCE
Before using the product for the first time, you need to charge the battery.
- Make sure that the switch is off and connect the charger connector to the appropriate socket on the device
- Insert the charger plug into an easily accessible socket. that the power supply heats up
- The battery indicator lights will start to flash. When all 3 lights are on steady, the battery will be charged. Remove the
plug from the power socket
The maximum battery charging time is approximately 4 hours.
The vacuum cleaner is equipped with the special sealing function of the refill. In the process of charging the vacuum
cleaner, when the charge indicator lights flash, the vacuum cleaner cannot operate even if the power button is pressed.
When the power of the vacuum cleaner is low, charge it promptly; when the voltage is too low, in order to protect
the battery, the vacuum cleaner will automatically turn off. At this point the vacuum cleaner must be recharged.
Before recharging, make sure the battery pack is installed correctly.