Care And Maintenance - Giordani little cookies Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
G
L
C
UK
IORdANI
ITTLE
OOkIES
ASSEMBLY INSTRUCTIONS
1.
Enter the 6 bearings in their positions.
2.
Insert the wheels into the special holes on the
bottom of the walker.
3.
Insert the 2 stoppers for the reduction
of wheel movement in the holes under the
bottom.
4.
Complete mounting of all parts on the bottom.
ASSEMBLY OF FABRIC SEAT
5.
Firstly, insert those 5 pins in the front of seat
into the holes on the upper tray referring to Fig
5/5a/5b. Then put those belts with buckle at
the back of seat through the holes on the upper
tray according to Fig 5c/5d, the belt is fixed
firmly as Fig 5e shown. The fabric seat is fixed
completely as shown on Fig 5f.
ASSEMBLY OF TOY TRAY
6.
Assembly of battery:
- Use a screwdriver to unscrew the battery cov-
er (See Pic 6a).
- Insert two 1.5V batteries inside, ensure cor-
rect polarity (see Pic 6b).
- Screw battery cover back on.
WARNING
- Non rechargeable batteries are not to be re-
charged.
- Rechargeable batteries (if they are remova-
ble) are to be removed from the toy in order
to be recharged.
- Rechargeable batteries are to be recharged
only under adult supervision.
- Do not mix different types of batteries, or new
and used batteries.
- Batteries are to be inserted with correct po-
larity.
- Flat batteries have to be removed from the
toy.
- The supply terminals are not to be short cir-
cuited.
- Do not try to open the batteries.
- Do not throw the batteries in the fire as they
could explode or leak some liquid.
- Batteries should be changed by adults only.
- Remove batteries before storing the toy for
long periods.
- Dispose of flat batteries in the designated
recycling bins.
walker
(FROM 6 TO 24 MONTHS APPROXIMATELY, MAX 12 KG)
- The activity centre operates with 2 AA 1.5 volt
batteries (not included) to be inserted in the
specific slot with correct polarity.
ASSEMBLY OF TOY TRAY
7.
Musical toy tray: switch on the musical-con-
trol button under the music toy tray after you
assemble on the battery, the music will come
out after you fix the batteries by pressing the
buttons on the toy tray (See Fig 7). As the pic-
ture shown on Fig 7, there are 4 snap-fit com-
ponents (A, B) on both front and rear toy tray.
As the arrow shown on Fig 7a, fix the rear toy
tray onto the upper tray, and then press down
the front toy tray to fix the toy tray, make sure
the snap-fit components are fixed firmly on
their position (see Fig 7b).
FUNCTION
8.
See Pic 8/8a.
To adjust walker to desired position (3 posi-
tions available), place one hand on the top of
walker, and turn the red button on the height
adjustment mechanism beneath the top tray
by 90 degrees with other hand, then push up
the button to adjust height position. Release
the button,it will return to original position, the
mechanism is locked automatically.
MUSICAL TOY TRAY
9.
The music will come out after you fix the bat-
teries by pressing the buttons on the toy tray
(See Pic 9).

CARE AND MAINTENANCE

Never force mechanisms or moving parts. If you are
not sure what to do,refer to the instructions. Clean
plastic and metal parts with a damp cloth or a light
detergent. Clean safety rubbers regularly to main-
tain stopping performance. Do not use solvents,am-
monia or petrol. Regularly check unit to ensure no
parts are loose or broken.
MATERIALS
Cover:
100% polyester
Frame:
Plastic - Steel
12
SIZES
Open:
L: 72 cm;
H: 54 cm;
D: 63 cm.
Closed:
L: 72 cm;
H: 28 cm;
D: 63 cm.
WARNING
• WARNING
Never leave the child unattended.
• WARNING
The child will be able to reach further
and move rapidly when in the baby walking frame.
• WARNING
Prevent access to stairs, steps and
uneven surfaces, slopes or unstable floors, swim-
ming pools or other sources of water. Guard all
fires, heating and cooking appliances.
• WARNING
Beware of strong heat sources and
stoves.
• WARNING
Remove hot liquids, electrical flexes
and other potential hazards from reach.
• WARNING
Prevent collisions with glass in doors,
windows and furniture.
• WARNING
Do not use the baby walking frame if
any components are broken or missing.
• WARNING
This baby walking frame should be
used only for short periods of time (e.g.20 min).
• WARNING
This baby walking frame is intended
to be used by children who can sit unaided, ap-
proximately from 6 months. It is not intended for
children weighing more than 12kg.
• WARNING
Do not use replacement parts other
than those approved by the manufacturer or
distributor.
• WARNING
Do not let other children play unat-
tended near the walker or climb on it.
• WARNING
When opening, closing and adjusting
make sure that the child is at a safe distance.
Should you have any questions about your baby
walker or experience any difficulties, please
contact the retailer from which you purchased
the product,your local retailer is in the best po-
sition to promptly address any requirements.
Use only on flat surfaces free of objects that
could cause the walker to tip over.
To avoid burns, keep the child away from hot
liquids,ranges, radiators, space heaters, fire-
places, etc.
The product shall be assembled by an adult.
DRAWINGS IN THIS MANUAL ARE FOR ILLUS-
TRATION PURPOSES ONLY,ACTUAL PRODUCT
MAY VARY, MANUFACTURER RESERVES THE
RIGHT TO CHANGE ANY SPECIFICATION OR
FEATURES WITHOUT PRIOR NOTICE.
• USER INFORMATION ON ELECTRICAL AND
ELECTRONIC EQUIPMENT
- Implementation of
Directive 2012/19/EU on electrical and elec-
tronic equipment waste (WEEE)
The strikethrough bin symbol on the ap-
pliance or on its packaging indicates
that the product must be disposed of
separately from other waste at the end of its life
for it to be properly treated and recycled. The
user must therefore confer the equipment at
the end of its life to suitable separate waste
collection centres for electronic and electronic
waste, or return it to the retailer according to
the following methods:
- for small equipment, with at least one external
side not exceeding 25 cm, there is free delivery
without obligation to purchase at stores with
a sales area of electrical and electronic equip-
ment of over 400 square metres. For smaller
stores, this mode is optional.
- for appliances which are larger than 25 cm,
delivery is provided at all points of sale on
1on1 basis, which is to say that the delivery
to the dealer will only take place when buying
a new equivalent product, on a one to one ba-
sis. Adequate separate collection for the future
recycling, treatment and environmentally com-
patible disposal of disused equipment, helps
preventing possible negative impacts on the
environment and on health, and promotes recy-
cling and/or reuse of the materials of which they
are composed. Improper disposal of the product
by the user entails the application of the penal-
ties referred to in current legislation.
F O R T E C H N I C A L O R CO M M E R C I A L R E A -
SONS, GIORDANI RESERVES THE RIGHT, AT ANY
TIME AND ALSO ONLY IN A SPECIFIC COUNTRY, TO
MODIFY THE TECHNICAL CHARACTERISTICS OF
THE MODELS DESCRIBED IN THIS LEAFLET, AND/
OR THE SHAPE, TYPE AND NUMBER OF THE ACCES-
SORIES SUPPLIED.
13

Publicidad

Tabla de contenido
loading

Tabla de contenido