Samsung RF23J9011SR/AA Manual Del Usuario página 15

LEVELING THE REFRIGERATOR
AND ADJUSTING THE HEIGHT
AND GAP OF THE DOORS
How to level the refrigerator
To ensure your refrigerator is stable, install it on
a flat, level surface and level it according to the
instructions in this section.
CAUTION
Failure to level the refrigerator may result in the
refrigerator tipping over and causing personal
injury.
- If the front of the refrigerator is slightly higher
than the rear, the doors can be opened and
closed more easily.
- When you install the refrigerator, make sure the
adjustable legs touch the floor.
The adjustable legs are located just behind the
doors on the bottom front right and left corners
of the refrigerator.
DA68-03194D-00.indb 15
If the Refrigerator is on a floor that is not level, it
can cause a height difference between the doors.
• Insert a Flat-Head (-) Screwdriver into the slot
in the Leveling Leg Control Lever and adjust the
level by turning the Control Lever clockwise or
counter-clockwise.
When you rotate the Lever clockwise, you raise
the refrigerator.
When you rotate the Lever counter-clockwise,
you lower the refrigerator.
Flat-blade
screwdriver(-)
• If the Refrigerator is not level back and
front, put a solid panel (such as a plastic
panel, a plastic ruler, etc.) on the floor
where the rear legs will rest, and then fix
it in place with plastic tape.
When you push in the Refrigerator, make
sure the rear legs rest on the panel.
• If you have a wooden floor or similar soft floor,
take care not to damage the floor when pushing
the Refrigerator into place.
English - 15
Control Lever
14. 12. 18. 9:41