Exo Terra PT2464 Manual De Instrucciones página 5

adjust the hours;
3. Press the "T" button once again and the clock minutes will start
blinking, turn the knob at the back to adjust the minutes;
4. Press the "T" button once again and the clock time setting is
finalised. Now the "SUN" symbol appears and the "daytime"
hours will start blinking; turn the knob at the back to adjust the
"daytime" hours;
5. Press the "T" button once again and the "daytime" minutes will
start blinking, turn the knob at the back to adjust the "daytime"
minutes;
6. Press the "T" button once again and the "daytime" setting is
finalised. The "MOON" symbol appears and the "night-time"
hours will start blinking; turn the knob at the back to adjust the
"night-time" hours;
7. Press the "T" button once again and the "night-time" minutes
will start blinking, turn the knob at the back to adjust the "night-
time" minutes;
8. Press the "T" button once again and the "night-time" setting
is finalised.
SET TEMPERATURE and HEATING MODE:
Daytime:
1. To set the "daytime" heating mode, temperature and humidity
press and hold the "SUN" button at the back of the thermostat
during 4 seconds.
2. The heating mode will start blinking; turn the knob at the back to
select the desired heating mode (ON/OFF or Dimming);
3. Press the "SUN" button once again and the temperature that
is currently set will start blinking; turn the knob at the back to
adjust the temperature;
8
4. Press the "SUN" button once again and the humidity level that
is currently set will start blinking; turn the knob at the back to
adjust the humidity level;
5. Press the "SUN" button once again and the desired "daytime"
heating mode, temperature and humidity setting is finalised.
Night-time:
1. To set the "night-time" heating mode, temperature and humidity
press and hold the "MOON" button at the back of the thermostat
during 4 seconds.
2. The heating mode will start blinking; turn the knob at the back to
select the desired heating mode (ON/OFF or Dimming);
3. Press the "MOON" button once again and the temperature that
is currently set will start blinking; turn the knob at the back to
adjust the temperature;
4. Press the "MOON" button once again and the humidity level that
is currently set will start blinking; turn the knob at the back to
adjust the humidity level;
5. Press the "MOON" button once again and the desired "night-
time" heating mode, temperature and humidity setting is
finalised.
• To check the "daytime" heating mode, temperature and
humidity, simply press the "SUN" button
• To check the "night-time" heating mode, temperature and
humidity, simply press the "MOON" button.
• To check the current time settings, simply press the "T" button
for current time, press "T" button again for "daytime setting",
press "T" again for "night-time setting".
• After setting the temperature, you can always switch between
°C and °F by unplugging the device, then press and hold the "T"
button while plugging-in the device. This will switch between °C
and °F, without changing your settings.
1. A Red LED will indicate when the heating device is powered
and once the set temperature is reached, the Red LED will no
longer show.
2. A Blue LED will indicate when the humidifying device is powered
and once the set humidity level is reached, the Blue LED will no
longer show.
"Please note that the Red or Blue LED indicates power to the
attached heating or humidifying device and not mains power to the
Exo Terra Thermostat/Hygrostat."
®
GUARANTEE
This unit is guaranteed for defects in material or workmanship for
a period of 1 year from date of purchase. This guarantee is valid
with proof of purchase only. The guarantee is limited to repair or
replacement only and does not cover consequential loss, loss or
damage to livestock and personal property or damage to animate or
inanimate objects, irrespective of the cause thereof. This guarantee
is valid only under normal operating conditions for which the unit
is intended. It excludes any damage caused by unreasonable use,
negligence, improper installation, tampering, abuse or commercial
use. The warranty does not cover wear and tear, breakage of glass or
parts which have not been adequately or correctly maintained. THIS
DOES NOT AFFECT YOUR STATUTORY RIGHTS.
SERVICE
If you have any problems or questions about the operation of
this product, please let us try to help you before you return the
product to your dealer. Most problems can be handled promptly
with a phone call. When you call (e-mail or write), please have all
relevant information such as model number and/or part numbers
available, as well as the nature of the problem. Please ensure that all
maintenance instructions have been adhered to before returning the
product to your retailer.
Distribution and Customer Service:
Canada:
Rolf C. Hagen Inc.
20500 Trans-Canada Hwy
Baie-D'Urfé QC, H9X 0A2
Toll Free Number 1-800-55HAGEN (1-800-554-2436)
Between 9:00 am and 4:30 pm (Eastern Standard Time)
http://faq.hagencrm.com/?en
U.S.A.:
Rolf C. Hagen (U.S.A.) Corp.
305 Forbes Blvd, Mansfield, MA 02048
Toll Free Number 1-800-724-2436
Between 9:00 am and 5:00 pm (Eastern Standard Time)
mail to: customer.service-usa@rchagen.com
For general information on our whole product range, explore our
websites at: www.exo-terra.com or www.hagen.com.