Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Push the rewind button to select the sound menu. Push the play/pause button to enter.
Sound
1)
Push the forward or rewind button to select the speaker or keytone option.
2)
Push the volume - or + button to select the option on or off.
3)
Push the play/pause to confirm.
Push the rewind button to select the time menu. Push the play/pause button to enter.
Time
1)
Push the forward or rewind button to select the option year, month, date, hours or
minutes.
2)
Push the volume - or + button to change year, month, date, hours or minutes.
3)
Push the play/pause button to confirm.
Push the rewind button to select the power mode menu. Push the play/pause button to
enter.
Power mode
1)
Push the volume - or + button to change to never, 30, 60 or 180 seconds.
2)
Push the play/pause to confirm.
For power saving mode select the option 30, 60 or 180 seconds. If no button is pushed
during the selected period, then the DVR will go into standby mode. The blue LED
indicators will be flashing during standby mode. Push the play/pause button to activate
the DVR again.
Push the rewind button to select the memory menu. Push the play/pause button to
enter.
Memory
1)
Push the rewind f or backward button to select the internal "flash" or external "SD"
memory.
2)
Push the play/pause button to confirm the use of the flash or SD memory. Push
again after the dialog box is displayed.
3)
Push the volume - or + button to select work space or format. Work space will
show an overview of the capacity of the memory, used and unused. With format it
is possible to erase data if the memory is full.
4)
If the option format is selected, push the play/pause button. A dialog box is
displayed. Push the volume - or + button to select OK or cancel. Push the play/
pause button to confirm.
5)
Push the ESC button to exit the memory menu.
6)
Push ESC to exit the "System Setup" menu.
4
Publicidad
Tabla de contenido
