For Your Safety; Machine Specifications; Machine Elements; Intended Use - Würth 0715 93 92 Instrucciones Para El Manejo

GB
Working safely with this
machine is possible only when
the operating and safety
information are read com
pletely and the instructions
contained therein are strictly followed.
• Before each use of the unit, check if it is
completely functional. If the functionality is not
ensured or if damage is detected (e. g. cracks),
the unit should not be used or made available.
• Carry the machine only by the transport handle
503.

Machine specifications

Tyre Inflator
Article number
Medium
Vessel capacity
Weight (empty)
Pressure gauge
Maximum allowable
operating pressure
Temperature

Intended use

The tyre inflator is intended exclusively for the
checking, inflating and deflating of tyres. The unit
may be operated only on a pressurised air network
that is approved for a maximum of 16 bar operating
pressure and that is outfitted with a safety valve.
All other usage or usage that exceeds these condi-
tions is considered not as intended.

Initial operation

• For the installation of the pressure line, observe the
recommended minimum distance.
• The filler valve 2 is fitted with G ½" exterior
threads.
• Operate the unit only with clean, condensationfree
compressed air.
6
0715_93_92_00219d_BAL_Reifendruckregler_Pneustar_12_2020.indd 6

For your safety

• For repair work, use only original Würth spare
• Do not make any constructional changes to the
• Never expose the pressure vessel to a heat
• Do not perform any welding work on the
• Before working on the pressurised parts of the
0715 93 92
Air
6 l
7 kg
0–10 bar
16 bar
–10 °C – +40 °C
parts.
unit.
source.
pressure vessel.
tyre inflator, relieve the pressure completely.

Machine elements

2
Filler valve
3
Automatic fillert
20
Pressure gauge
503 Transport handle
715 Condensation drain screw
07.12.20 10:03