Cardin Elettronica S508 Manual De Instrucciones página 17

Outdoor receivers (fig. 5)
The outdoor receiver is fitted with a 12-way terminal board and has a 12/24V ac-dc electrical con-
nection between binding posts 11-12.
Interchangeable channel modules - MCCMORPHM0
In the receivers the channel functions are printed on the circuit board near the module's slot-in posi-
tion: insert the module or modules into the slots that correspond to the channels you intend to use.
The receiver can be fitted with up to four interchangeable channel modules.
The modules are set on the display to the following functions:
- Impulsive, ON/OFF, timer-controlled.
Receiver code memory module
The codes are stored in a non-volatile EEPROM memory module.
The receiver is designed to manage up to 1000 users (1000 transmitters) with the possibility of
memorising and cancelling each individual user. For each transmitter it is possible to memorize a
maximum of 4 functions: A - B – C – D. The memorized codes are maintained in this module even in
the absence of power for an unlimited period of time.
SYSTEM MANAGEMENT OPERATIONS
• Memorizing a channel code
• Deleting a channel code (via an associated transmitter)
• Deleting the entire code memory (users)
• Memorizing more transmitters by using a previously memorised transmitter
Attention! Before memorising the transmitters for the first time remember to cancel the entire
memory content.
The receiver's programming buttons can be blocked through the software CARDINTX_SW. In this
case, pressing the buttons will force the error code to appear on the display.
17