Getting Started; After Use - Braun Satin Hair Colour ES 3 Manual Del Usuario

temperature by 20 °C with the backlight flashing. Afterwards,
the appliance switches back to the previously selected
temperature.
• Safety auto off: For safety reasons, the appliance automatically
switches off after 30 minutes. Five minutes prior to switching off,
the display shows «auto off» [E] along with a red flashing
backlight. If you want to keep on straightening, simply press the
«on/off» button (5) again shortly.
• Memory function: In order to make your styling session as
convenient and quick as possible, the appliance stores your last
personalised settings for the next usage.

Getting started

• Connect the appliance to an electrical outlet and push the
«on/off» button (5) for 1 second to turn it on.
• During heat up, the display turns orange/red. The appliance is
delivered with a default setting for normal hair, medium. The
thermometer symbol is flashing [A] as long as the temperature for
the displayed setting is not reached.
• After approx. 30 seconds, the display turns green to indicate that
you can start using the appliance. As soon as the temperature for
the selected setting is reached, the thermometer symbol stops
flashing.
• When changing the hair type setting, the display turns orange/red
and the thermometer symbol flashes again. When the display
turns green, you can go ahead with styling.
Styling
Preparation
• Make sure your hair is completely dry before using the appliance.
• First, comb your hair through with a wide toothed comb to
remove tangles [G].
• Section your hair off. Starting close to the roots, take a thin
section of hair (strands of 3–4 cm maximum) and clamp it firmly
between the styling plates [H].
How to straighten your hair
• Gently run the straightener through the entire length of the hair,
slowly and steadily, from roots to the ends [I] without stopping for
longer than 2 seconds. This will ensure best straightening results
without damaging your hair. The styling plates (8) ensure easy
and smooth gliding.
• For improved control when gliding along a strand, you may
stabilise the appliance by holding it with the other hand on the
cool touch points (1).
• You can create flicks at the hair ends by slowly turning the
appliance either outwards or inwards before releasing a strand.
How to form curls
With the Braun satinliner, you can also create loose curls and
waves [J]:
• Clamp a strand at the roots,
– turn the appliance half a turn,
– then slowly move the appliance horizontally towards hair ends
and the strand will turn into curl.

After use

After each use, switch off the appliance by pushing the «on/off»
button (5) for 1 second.
Residual heat indicator:
As long as the appliance is not unplugged, the display turns red
and shows the cooling down symbol [F] during the cooling down
phase. Only when the temperature has dropped below 60 °C, the
display switches off and you can touch the appliance without any
risk.
Cleaning
Always unplug before cleaning. Never immerse the appliance in
water.
Clean the appliance with a damp cloth and use a soft cloth to dry.
Subject to change without notice.
This product conforms to the European Directives
EMC 2004/108/EC and Low Voltage 2006/95/EC.
10