Lift-Master PRO7100 Instrucciones página 23

SPECIFICATIONS
Input Power.....................230-240V, 50Hz, 150W
Rated Pull Force .............700N
Motor
Type ................................DC Permanent lubrication
Volts ................................24 V DC
Drive Mechanism
Length of Travel ..............Adjustable to 3,5m (with 3m rail)
Travel Rate .....................17cm per second nom., 20-100% ramp
Lamp ...............................1 x 40 W, on when door starts, off 2-1/2
minutes after stop. Bulbs not included.
Door Linkage...................Adjustable door arm. Pull cord trolley
release.
Safety
Personal..........................Push button and automatic reversal in down
direction. Push button and automatic stop in
up direction.
Electronic ........................Independent up and down force adjustment
screws.
Electrical .........................Low voltage push button wiring.
Limit Adjustment .............Electronic by "Smart" button.
Start Circuit .....................Low voltage push button circuit.
Dimensions
Length (Overall) ..............3,26m (with standard rail)
Headroom Required........40mm
Hanging Weight ..............14,5 kg
Receiver Code Registers
Billion Code.....................12
Dip Switch ......................1
Keypad ...........................1
Operating Frequency ......433.92MHz
114A2322C-GB