EDELRID SERIUS INDUSTRY Manual Del Usuario página 13

EN
INDUSTRIAL SAFETY HELMET ACCORDING TO EN
397, EN 50365
ANSI/ISEA Z89.1-2014 Type I Class G
SERIUS INDUSTRY
INFORMATION ON USE, SAFETY, LIFESPAN, STORAGE
AND CARE
This product is part of personal protective equipment
(PPE) and should be assigned to a specific person. This
manual contains important notes (Industrial safety hel-
mets according to EN 397 and ANSI/ISEA Z89.1-2014
Type I Class G: additional control card and test certifi-
cate). Before using this product, all documents must have
been read and their content understood.
This document must be provided to the user by the retail-
er in the respective country's language and must be kept
with the equipment while it is in use.
Instructions for use
These instructions must be carefully read and followed.
This product has been manufactured especially for work-
ing at heights and in depths and does not release the user
from any personal liability.
Mountaineering, climbing and working at heights and in
depths often harbour hidden dangers and risks caused by
external influences. Risk of accidents must never be ex-
cluded. In order to achieve maximum safety when moun-
taineering, climbing and working at heights and in depths,
safe use of equipment is only guaranteed if it complies
with industrial norms.
For more detailed and comprehensive information,
please refer to relevant special literature.
The following instructions are important to ensure appro-
priate and correct use of the equipment. However, they
cannot replace experience, responsible behaviour and
awareness of the risks inherent in mountaineering, climb-
ing and working at heights and in depths and do not re-
lease the user from any personal responsibility. Use of the
equipment is only permitted to fit and experienced indi-
viduals or under appropriate guidance and tuition.
Users must be aware that poor physical and mental
health can jeopardise safety under normal conditions and
in emergencies.
Before using the equipment, users must familiarise them-
selves with safe and effective rescue procedures.
The manufacturer cannot be held liable if the equipment
has been abused or used incorrectly.
All risks and responsibilities are borne by the user at all
times.
When using this product in the areas of rescuing and
personal protective equipment, we recommend that the
relevant national regulations be observed.
PRODUCT-SPECIFIC INFORMATION
Specification
This product meets obligatory requirements of High Visi-
bility according to ANSI/ISEA Z89.1-2014 Type I Class G,
if the product is labeled with HiVis.
Fitting
To provide safe protection, this helmet must be adapted
to the head size of the user. The safety helmet must be
adjusted to head size in such a way so that it cannot shift
or slip off when the chin strap has been tightened. This is
the only way to ensure protection from the helmet. The
helmet is only secure when the chinstrap is closed, the
straps are pulled taught, and adjustments have been
made to fit individual head size. The straps may not cover
the ears and the closure may not rest on the chin. No