Publicidad
Idiomas disponibles
Idiomas disponibles
6. Bluetooth
configuration
®
The connection procedure has been designed to be simple and is signalled
by the following three states:
° Symbol
off .............. disconnected mode
° Symbol
blinking ...... advertising mode
° Symbol
on .............. connected mode
The following options can be selected to control the Bluetooth
On
Enable Bluetooth
OFF
Disable Bluetooth
rESEt
Clear pairing information.
MAC
Display the MAC (Media Access Control) address.
Three Bluetooth
®
SIMPLE
Profile without pairing (default).
PAIr
Paired and secured profile.
HId
Virtual keyboard mode (compatible with recent equipment
without driver installation).
Note:
- Bluetooth
pairing information is cleared when the profile is changed.
®
Connection :
1° Activate Bluetooth
Display Unit).
2° Start the instrument. By default the Bluetooth
instrument is available for connection (advertising mode).
3° If no connnection is established during the advertisement period reacti-
vate the Bluetooth
4° Instrument is ready to communicate (connected mode.)
Only with paired profile :
Pairing with master is automatically done at first connection.
To connect the instrument to a new master (new pairing), pairing information
on the instrument must be cleared using the bt / rESEt menu.
8
module (start advertising mode).
®
module (terminate active connection).
®
profiles are available.
compatible software and hardware (Master : PC,
®
module using the bt / On menu.
®
module.
®
module is active and the
®
Publicidad
