Publicidad
Idiomas disponibles
Idiomas disponibles
On the rear, the oven is supplied with four screws at the top, two on each side. The screws
must be removed, one side at a time. The box with the wall mounting contains two angle
fittings and four M6x40 screws. The removed screws should be replaced by these screws
and angle fittings.
The four M6x35 pointed screws and the nuts and washers on the bottom of the oven must
be removed. The box with the wall mounting contains two M6x20 screws and two washers
which should be used to fix the wall mounting on the bottom.
The basic oven is lifted into place, so
that its sits on the bottom of the wall
mounting. Assemble the stove using
the 2 no. M6x12 screws supplied at
the top and the other two M6x20
screws and washers which were pre-
viously removed at the bottom. (see
sketch). We recommended that 2
persons should carry out this work.
7
Publicidad
