Panasonic TY-EW3D3LE Instrucciones De Operación página 10

2. Bend the frame inwards and pull it off from the side cover.
If it is difficult to pull off, insert a flat-blade (minus
screwdriver and pry open it.
3. Pull off the battery and separate it from the 3D Eyewear by
cutting off the wires, one by one, with scissors.
Insulate the wire parts of the removed battery with
cellophane tape.
NOTE
• Take sufficient care when performing this work so as not to injure
yourself.
• Do not damage or dismantle the battery.
10
Battery
)