Ingco MG1309 Guia Del Usuario página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To ensure safe operation when using your Rotary Tool, make sure you follow basic
safety principles to reduce risk of personal injury, electric shock, and fire.
Please read the following instructions prior to operating this product and keep for
future use.
1. Beware Children
Do not let children handle the
onlookers should be away from
area.
2. Guard Against Electric Shock
Keep the tool clear of the cable while
working. Do not work on or near "live"
equipment or services.
3. Work Environment
Do not use the tool
Do not use near flammable gases or liquids.
4. Personal Safety
For your own safety, wear safety glasses
or goggles. Tie back long hair. Use ear
protectors especially in confined areas. Keep
fingers, etc. clear of the moving parts whilst
in use.
5. Clothing
Avoid wearing loose clothing or jewellery to
prevent these being caught in moving parts.
6. Do not force the tool
It will do a better job and safer at the rate for
which it was intended.
7. Look after the tool
When not in use store in a dry, high place or
keep locked up out of children's reach.
Use the tool only for its intended purposes.
8. Protect the Cable
Do not carry the tool by the cable or pull the
cable to remove the plug from the mains
socket. Protect the cable from sharp objects,
heat and oil; have it replaced if damaged.
9. Check Before Use
Always ensure that the tool and cable are
not damaged.
10. Maintain tools with care
Inspect tool cord and extension leads
periodically for damage, if damaged
repair carried out by an
Disconnect Tools
11.
When not in use or changing the tools
always disconnect from mains supply.
12. Avoid unintentional starting
Ensure switch on tool is off before
plugging in.
tool. All
your work
in
damp or wet areas.
have
authorised dealer.
2|English
13. Do not use tool when tired.
14. Check that tool is not damaged.
Before use check there is no damage to
tool, if in doubt have tool checked over by
an authorised dealer.
15. Repairs
Always have repairs carried out by a
qualified person for your safety.
Important notes
Remove the mains plug from socket
before carrying out any adjustment
or servicing.
Important additional safety notes for your
rotary tool.
16. Do not use damaged/worn or unshaped
tools.
17. Do not use tools with bent shafts.
18. The tool is designed for light and
intricate work do not use for heavy
work as you may damage the tool.
19. Check the collet nut frequently for
tightness, especially if using the tool
at very high speed.
20. Use only the accessories supplied or
recommended by your dealer, other
accessories may risk personal injury.
21. Use correct speed, see page 6.
22. Clean ventilation slots after use.
23. Do not run the tool with any part of the
casing missing or damaged.
24.
Warning:
arise from sanding e.g. Lead painted
surfaces, woods and metals.
Contact with or inhalation of these dusts
can endanger the health of operator and
bystanders.
Always wear eye protection
with this tool.
Harmful/toxic dusts will

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Umg1309Mg1309-6Mg1309mMg1309pMg1309sMg1309-8 ... Mostrar todo

Tabla de contenido