GYS TOPARC D1009 Guia De Inicio Rapido página 3

Translation of the original instructions
EN
PROTECTION SCREEN FOR GRINDING
Users information for face shield {en 166)
type: d1009
Caution
this face shield does not provide unlimited face protection. for your own protection, read this instruction completely before
using this face protection.
Requirements
this face shield complies with the essential requirements according to annex il of the ppe regulation (eu) 2016/425 en166 :
2001. «personal eye-protectors, face screen specifications».
Storage
when not in use, it is recommended to store the face shield in a clean and dry poly bag or case for visor protection.
Direction for use
this face shield has been design ed for your personalsafety. it must be worn for the who le du ration of exposure to hazards.
leave the work area if dizziness for irritation occurs, or if the face shield become damaged.
Cleaning and maintenance
to maintain your face shield in good condition:
l.do not use abrasive materials, clean and rinse in warm soapy water and dry with a soft cloth.
2.any part of the face protector that is in contact with the wear er shall be disinfected by alcohol.
Field of use
this face shield is design ed to protection the user against eve and face injuries through mechanical impact or splashes liquids.
the face shield is mark ed on the brow protection with symbols to indicate the manufacturer, the field of the use, the standard
which the products fulfill. the marking on frame are signified as follow :
Marking of the brow frame :
novartixm3 nvm3700601 ce en166:2001 d1009
nvm3700601: item number.
D1009 : the mo del number of manufacturer
CE: ce certification
Protection class : 1
Protection against high-speed particles, medium energy impact (b) and against splashes of liquids (3)
EN166 :2001 : number of the standard which the products fulfill.
Package :
You could put this protector in a plastic bag for the pur pose of transport it.
Method of fitting and replacement of screen
Firsttear off the thin film on the outer part of the screen in front of your face and place the headband on forehead. adjustthe
length knob on back of head hoop to fit your head. to change a new screen, no tool is needed. just unlock the small button
on the frame and hold the screen to take out the worn screen, then place a new one and lock the small button on the frame
again.
Du ration of use
Inspect for damage regularly. when the face protector has become brittle, the face shield should be replaced.
Warning
- this product is for face protection against mo derate impact hazards but not unbreakable.
- do not modify or alter the face protector.
- pitted or scratch ed screen redu ce vision and seriously redu ce protection and should be replaced immediately.
- this face protection has not any filtering action. it does not protect against molten metal splash, hot solids or electrical
hazard.
- always check with supervisory personnel to ensure vou are seing given the proper protection relative to working conditions-
consult the relevant european standards.
- the material that may come into contact with the wearer's skin could cause allergic reactions to susceptible individuals.
Certification
ECS gmbh notified body 1883
Add : huttfeldstrasse 50 73430 aalen germany.
3