Publicidad
DOOR MOUNTING
Two ways to door mount:
1) By measuring (refer to included
door mount worksheet).
2) Using the included double stick
tape (steps 7-9).
USING
DOUBLE-SIDED TAPE:
STEP 7
Apply Double-Sided Tape to
door mount brackets between
the screw holes. Remove outer
label from tape (See Fig. I).
STEP 8
Align door to adjacent doors
and push into the double sided
tape. Slowly pull entire unit out
of cabinet keeping the door
secured to the double sided
tape. Attach door using (6) #6 x
1/2" Screws (3 screws per side)
(See Fig. J).
Note: Pre-drill 3/32" (3 mm)
pilot holes. DO NOT DRILL
THROUGH DOOR.
3
3
8
32
STEP 9
5
#1
16
If door adjustment is needed,
the screws attached in step
8 will need to be loosened
or removed prior to making
adjustments.
1
2
4
FIG. H
FIG. I
1
1
4
8
7
64
#2
#2
5
8
FIG. J
#2
FIG. K
800-626-1126 | rev-a-shelf.com
Publicidad
