Checking The Code Number - GlucoRx Vet TD-4268 Manual Del Propietário

NOTICE:
Make sure the code number on display, code strip, and test strip vial
are all the same.
2. After removing the code strip, the display will show "OK". This tells
you that the meter has finished coding and is ready for blood glucose
testing.

Checking the Code Number

You need to ensure that the code number displayed on the meter
matches the number on your test strip vial before you proceed. If it
matches, you can proceed with the test. If the codes do not match,
please stop testing and repeat the calibration procedure. If the
problem persists contact GlucoRx Customer care on 01483 755133
for help.
WARNING:
It is important to make sure that the LCD displayed code is the same as the
code on your test strip vial before testing. Failure to do so will get inaccurate
results. If the LCD displayed code is not the same as the code on your test
strip vial, and the code number cannot be updated, please contact GlucoRx
Customer care on 01483 755133 assistance.
(c)
13