Control Solution Testing; Performing A Control Solution Test - GlucoRx Vet TD-4268 Manual Del Propietário

Control Solution Testing

Our Control Solution contains a known amount of glucose that reacts
with test strips, and is used to ensure your meter and test strips are
working together correctly.
Do a control solution test when:
● you first receive the meter,
● at least once a week to routinely check the meter and test strips,
● you begin using a new vial of test strips,
● you suspect the meter or test strips are not working properly,
● the test results are not consistent with how your pet is acting,
feeling, or if you think the results are not accurate,
● practicing the testing process, or
● you have dropped or think you may have damaged the meter.
Test strips (e), control solutions (f), lancing device (g) sterile lancets
(h) should be included in the kit (please check the contents of
your product box). They can be obtained separately from GlucoRx
Customer care. Please ensure you have all items needed for a blood
glucose test beforehand.

Performing a Control Solution Test

To perform a control solution test, you will need: (d), (e) and (f).
1. Insert the test strip to turn on the meter
Insert the test strip into the meter. Wait for the meter to display " "
and " ".
2. Press M to mark this test as a control solution test
With " " displayed, the meter will store your test result in memory
under " ". If you press M again, the " " will disappear and this
test is no longer a control solution test.
14