HID iCLASS SE Manual De Instrucciones página 3

iCLASS SE® RB25F Installation Guide
4.
Power and test the RB25F
5.
Download and install HID Biometric Manager
Specifications
INPUT VOLTAGE
12 VDC
Standby AVG - Root Mean Square current draw without a card in the RF field.
1
Maximum AVG - Root Mean Square current draw during continuous card reads. Not evaluated by UL.
2
Peak - highest instantaneous current draw during RF communication.
3
January 2019
Visit https://www.hidglobal.com/rb25f
Installer. Once the .exe file has downloaded, double-click the file to install HID
Biometric Manager, following the on-screen prompts.
For further details, refer to the HID RB25F Biometric Reader/Controller Administration
Guide (PLT-04029), which is available for download from:
https://www.hidglobal.com/rb25f
CURRENT
STANDBY AVG MAX AVG
1
800 mA 1.5 A
Light bar.
Turn on the power.
The reader should beep and the light bar should flash.
Test the reader with a card.
The reader should beep and the light bar should flash.
Biometric reader (requires set up in HID Biometric Manager)
and download the HID Biometric Manager
PEAK
2 3
2 A
3
OPERATING TEMPERATURE
-4° F to 150° F (-20° C to 66° C)
PLT-04027, Rev. A.0