Adjusting The Backlight; Service And Warranty Information - Tru-Test EziWeigh5 Guia De Inicio Rapido

small animals, you may require more accurate measurements. By setting the resolution to 0.1 kg, the indicator will weigh to the nearest tenth of a
kilogram, although it may take longer for the scale to stabilise.
The resolution options depend on the type of load bars being used with the indicator.
To modify the resolution:
Press repeatedly to set the resolution.

Adjusting the backlight

You can adjust the backlight to suit the lighting conditions. Use of the backlight will affect battery consumption – the run-time will double if the backlight is
set to Low instead of High.
To modify the backlight setting:
Press repeatedly to set the backlight to High, Off or Low.
Caring for the indicator
Do not leave the indicator or load bars in water. Store the indicator in a cool, dry place.
By default, the indicator turns itself off after 15 minutes of inactivity in order to conserve the battery.
Wipe the indicator using a damp cloth, warm water and soap. Other cleaners may damage the case.

Service and warranty information

For service and warranty information, see www.tru-test.com.
Specifications
Total capacity
Resolution
Accuracy
Power supply
Operating temperature
Storage temperature
Internal battery run time
Environmental
2000 or 3000 kg (4400 or 6600 lb) depending on load bars used.
Set to 0.5 kg (fine mode 0.1 kg) or 1 lb (fine mode 0.2 lb).
±1 % or 2 resolutions (whichever is greater) with Tru-Test load bars connected.
5 V DC (power adaptor).
-10 to +40 °C (+14 to +104 °F).
-20 to +35 °C (-4 to +95 °F).
Up to 20 hours with 2 load bars connected.
IP67 (immersion in up to 1 m (3') of water).