Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Installation:
Read all instructions carefully and follow each step in
order. Shut down your computer and turn off power to
all stereo equipment before installation. Failure to do so
could result in injury or equipment damage.
Wireless MP3 Transmitter Set-Up
1.
Plug the power adapter to a standard electrical outlet
(GE surge protector recommended) and to the
Wireless MP3 Transmitter.
2.
Connect the 3.5mm stereo cable to the output jack on
a standard computer sound card or other audio source.
The output jack on most sound cards is green.
3.
Connect the other end of the 3.5mm stereo cable to
the input jack in the Wireless MP3 Transmitter.
4.
(Optional) Connect PC speakers or headphones to the
3.5mm output jack on the transmitter.
5.
Raise antenna on back of transmitter so it is straight
up and down for best transmission.
6.
Press the power button on the MP3 Transmitter and
confirm that the power LED is on.
Publicidad
Tabla de contenido
