Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
© Panduit Corp. 2013
¼" NPT connection for
air line from CT-600-A
Front
INSTALLATION OF FOOT PETAL (FPC-600-A)
1.
Position Actuator on back of CT-600-A and attach with thumbscrews.
2.
Assemble ¼" NPT male connector from Air Hose to pipe tee connection. Connect ¼" Industrial
quick disconnect fittings to Air Supply Line. Refer to AIR SUPPLY section on Page 3 of Operating
Instructions.
E-mail:
techsupport@panduit.com
For Technical Support: www.panduit.com/resources/install_maintain.asp
FPC-600-A
FOOT PEDAL CONTROL ASSEMBLY FOR CT-600-A
OPERATING INSTRUCTIONS
www.panduit.com
Page: 1 of 2
PA25406A01
Rev. 01 5-2013
Technical Support:
888-506-5400, ext. 83255
Publicidad
Manuales relacionados para Panduit FPC-600-A
Resumen de contenidos para Panduit FPC-600-A
- Página 1 ¼” NPT connection for air line from CT-600-A Front INSTALLATION OF FOOT PETAL (FPC-600-A) Position Actuator on back of CT-600-A and attach with thumbscrews. Assemble ¼” NPT male connector from Air Hose to pipe tee connection. Connect ¼” Industrial quick disconnect fittings to Air Supply Line. Refer to AIR SUPPLY section on Page 3 of Operating Instructions.
- Página 2 CT-600-A Frente INSTALACIÓN DEL PEDAL DE CONTROL (FPC-600-A) Coloque el activador en el soporte de la CT-600-A y fíjelo con tornillos tipo mariposa. Ensamble el conector macho NPT de ¼’’ desde la Manguera de Aire hacia la conexión del tubo tipo “T”.