Using the Chronograph
1. Press A to start/stop the chronograph.
2. Press B to reset the chronograph to zero.
Chronograph Reset (including after replacing the battery)
This procedure should be performed when the stopwatch second
or minute hand does not return to the zero position.
1. Pull the crown out to position 3.
2. Press A to set the chronograph second hand forward. Press B
to set the chronograph second hand backward.
• The chronograph minute hand is synchronized with the
chronograph second hand.
• The chronograph second hand can be advanced rapidly by
continuously pressing A or B.
3. Once both hands have been set to zero, reset the time and
return the crown to position 1.
6
Water Resistance
See caseback for water resistance rating.
The water resistance rating provides guidelines for appropriate water-related
exposure to avoid damage to internal watch components. Please see chart for
recommended usage guidelines.
In order to ensure water does not enter the watch and cause damage to it, please
follow the instructions listed below:
• Do not adjust the crown while the timepiece is in contact with water.
• Ensure the crown is in the closed position before contact with water. For
timepieces with screw-down crowns, ensure the crown is completely tightened
before contact with water.
• For timepieces with pusher-enabled functionality, do not engage the function
underwater.
• Exposure to extreme atmopheres is not recommended (i.e. hot water, saunas
or steam rooms).
• Avoid exposure to water moving with force (i.e. water running from a faucet,
ocean waves or waterfalls).
• Avoid long exposure to salt water. After contact with salt water, rinse watch
under tap water if rated 5ATM or higher and wipe dry with a soft cloth.
RECOMMENDATIONS FOR WATER-RELATED USE
SPLASH RESISTANT
INDICATION
(Hand Washing)
(NONE)
3 ATM • 3 BAR • 30 Meters
5 ATM • 5 BAR • 50 Meters
10 ATM • 10 BAR • 100 Meters
20 ATM • 20 BAR • 200 Meters
SUBMERSIBLE
SHALLOW DIVING
SCUBA DIVING
(Swimming)
(Snorkeling)
(Not Deep Sea)
7