Using The Chronograph; Water Resistance - Michael Kors VX3JE Manual De Instrucciones

Using the Chronograph

1. Press A to start/stop the chronograph.
2. Press B to reset the chronograph to zero.
Chronograph Reset (including after replacing the battery)
This procedure should be performed when the stopwatch second
or minute hand does not return to the zero position.
1. Pull the crown out to position 3.
2. Press A to set the chronograph second hand forward. Press B
to set the chronograph second hand backward.
• The chronograph minute hand is synchronized with the
chronograph second hand.
• The chronograph second hand can be advanced rapidly by
continuously pressing A or B.
3. Once both hands have been set to zero, reset the time and
return the crown to position 1.
6

Water Resistance

Caseback
Depth
Marking
Washing
Hands
— —
WR —
3 Bar,
3 ATM
30 Meters
5 Bar,
5 ATM
50 Meters
10 Bar,
10 ATM
100 Meters
20 Bar,
20 ATM
200 Meters
30 Bar,
30 ATM
300 Meters
50 Bar,
50 ATM
500 Meters
Always set the crown in closed position (the normal position).
Tighten screw-lock crown completely.
• To ensure water resistance, exposure to hot water is not recommended.
• Clean your watch with a soft cloth and water only. Do not submerge your watch
under water unless it is water rated (see caseback).
• After salt water use, rinse watch under tap water and wipe dry with a soft cloth.
• Metal watch bands should be washed periodically to keep them looking beautiful.
Clean with a soft brush dipped in mild, soapy water. Be sure to wipe dry
thoroughly with a soft cloth.
Water-Related Use
Shower, Swimming, Scuba
Bathing Snorkeling Diving
7