Scientific Explorer Meteor Rocket Manual De Instrucciones página 5

Step 2: Make and Attach Fuselage Tube
The fuselage tube is made from the red plastic sheet. There is
enough extra for repairs if the tube is damaged.
A. Cut the red plastic into a strip 3 ½" wide x 10 5/8" long.
10 5/8"
27cm
B. Cut a strip of foam tape 10" long. Remove the backing and
attach the foam in a straight line across the length of the red
plastic. The foam should be placed 3/8" from the edge of the
sheet as shown.
Red plastic sheet 10 5/8" long.
Attach foam tape 3/8" from edge.
C. The red plastic rolls into a tube, with the foam on the inside,
to make the fuselage.
Use tape or
silver foil to
attach fin holder
(with fins) to the
bottle.
4