ASROCK Z590 PG Velocita Manual Del Usuario página 32

Serial ATA3 Connectors
Right Angle:
(SATA3_0:
see p.1, No. 17) (Upper)
(SATA3_1:
see p.1, No. 17) (Lower)
(SATA3_2:
see p.1, No. 18) (Upper)
(SATA3_3:
see p.1, No. 18) (Lower)
(SATA3_4:
see p.1, No. 19) (Upper)
(SATA3_5:
see p.1, No. 19) (Lower)
USB 2.0 Header
(9-pin USB_3_4)
(see p.1, No. 27)
USB 3.2 Gen1 Headers
Right Angle:
(19-pin USB3_5_6)
(see p.1, No. 16)
Vertical:
(19-pin USB3_7_8)
(see p.1, No. 13)
28
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
1
Dummy
IntA_PA_D+
IntA_PB_D+ IntA_PA_D-
IntA_PB_D- GND
GND
IntA_PA_SSTX+
IntA_PB_SSTX+
IntA_PA_SSTX-
GND
IntA_PB_SSTX-
GND IntA_PA_SSRX+
IntA_PB_SSRX+ IntA_PA_SSRX-
IntA_PB_SSRX- Vbus
Vbus
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
IntA_PB_SSTX-
GND
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
These six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_2 is occupied,
SATA3_0 and SATA3_1
will be disabled.
* If M2_3 is occupied by
a SATA-type M.2 device,
SATA3_3 will be disabled.
There is one header on
this motherboard. This
USB 2.0 header can
support two ports.
There are two headers on
this motherboard. Each
USB 3.2 Gen1 header can
support two ports.