Setting Up Your Tunestudio; To Set Up Your Tunestudio - Belkin TuneStudio Manual Del Usuario

SEttiNG uP YouR TuneStudio

It only takes a few minutes to set up your TuneStudio and start recording.

to set up your tuneStudio:

1
Verify all devices are turned off and all level controls are set to -∞ (completely to the left).
2 Connect the input sources.
3
Insert your iPod into your TuneStudio's iPod dock.
4 Connect the PC, studio monitors, and/or headphones.
5
Plug TuneStudio and other devices into AC power.
6 Turn everything on in the following order:
• Input sources
• TuneStudio (turning on your TuneStudio will turn on your iPod)
• Studio monitors, headphones, and/or computer
7
When turning off, always turn off devices in the following order:
• Studio monitors, headphones, and/or computer
• TuneStudio
• Input sources
8 Go to www.belkin.com/registration to register your TuneStudio.
5