GB
Reversing the door
The side at which the door opens can be changed from the right side(as
supplied) to the left side, if the installation site requires.
Warning!
When changing the side at which the door opens, the appliance must not be
connected to the mains. Remove plug from the mains beforehand.
The side at which the door opens can be changed from the right side (as supplied)
to the left side, if the installation site requires. Tilt the appliance slightly towards the
rear and prop it securely. Unscrew the door hinge screws and remove the hinge pin
bracket. Open the door a little way and take it out downwards.
Unscrew the upper pin and screw it into place on
the opposite side. Fit the door into the upper pin and
close it. Screw the hinge pin bracket securely into
place on the opposite side using the screws.
Integrated Cooling
Technical Diagrams
6