Important Safety Instructions - JBL on stage micro Guia Del Usuario

Important Safety Instructions

Please read the following precautions before use:
• Read instructions. All safety and operating instructions should be read thoroughly before
attempting to operate this audio system.
• Retain instructions for future reference.
• Heed warnings. All warnings on this audio system and in the operating instructions should
be adhered to.
• Follow instructions. All operating and use instructions should be followed.
• TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR
BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT.
PLEASE REFER SERVICING TO QUALIFIED JBL SERVICE PERSONNEL.
• Do not expose the speakers to liquid or solvent.
• Never remove grille covers in order to service the speaker system. The speaker system does
not contain any user-serviceable parts. Refer all servicing to the JBL
Technical Support Group.
• Do not expose the speaker system to temperature or humidity extremes, direct sunlight,
excessive dust or vibrations.
• Place the speaker system on a stable, level surface. Do not drop, apply excessive force to the
controls or put heavy objects on top of the speaker.
• If cleaning is required, use a soft, dry cloth. If necessary, use a damp cloth without any
solvents.
• In order to protect the speaker system, avoid microphone feedback, continuous output from
electronic musical instruments or distorted output from any signal source.
• Do not place the speakers close to fluorescent light sources or neon light fixtures.
• Although the speakers are magnetically shielded, keep magnetic storage media (disks and
tapes) at least four inches from the speaker system in order to avoid data loss.
• WARNING: To reduce the risk of fire or electric shock, do not expose this speaker system to
rain or moisture.
• CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used
Batteries According to the Instructions
• Use only JBL-approved power supplies listed on the product label.
Important Note for All Electronic Products:
Before inserting or unplugging audio cables from the source
device's headphones or line-level output jacks, it is good practice
to turn off the device first. This will prolong the life of your unit,
help protect your device from static electricity and prevent poten-
tial damage.
2