Important Safeguards - Sinbo SCO 5020 Manual De Instrucciones

IMPORTANT SAFEGUARDS

Use plug to ensure the appliances to be earthed; ensure that the voltage
indicated on the appliances corresponds with mains voltage.
Ensure the pot base and the surface of the heating plate dry and clean to avoid
electronic break down.
Protect the pot against bump may cause the pot to be deformed. Never use
the pot on other heat sources.
Place the appliances on a stable level surface; never place the pot on something
that causes fire easily.
Do not be so near to the appliances' steam nozzle when cooking. Face or
hands may be scalded by steam.
Never wash the housing with water or place the housing directly into the
water, this will cause power failure.
Use the attach plastic spoon to take food out; such spoons as metal spoons
may scratch the pot base and damage the coating.
No not cover the steam nozzle while cooking .this will cause the cooker to the
deformed
Never disassemble the electric cooker on your own, this may influence the
cooker's safety features.
The cover handle is only used to open the cover, never use the handle to pick
up and move the rice cooker, especially when filled with food, scalding would
happen otherwise.
The electric rice cooker has its own linkage and corresponding outlet; Replace
the cord with special soft cord once it is damaged.
PROBLEM AND CAUSES
1. Power indicator does not illuminate.
Heating plate is not hot!
Not connect with power
Check the switch/plug outlet fuse & cord and see whether they do work well
or not.
Heating plate is hot!
Cause 1. The connections inside are loose.
Solution 1. Join them together again.
- 11 - SCO 5019, SCO 5020 INSTRUCTION MANUAL