How To Operate - Sinbo SCO 5020 Manual De Instrucciones

Cause 2. The indicator are damaged.
Solution 2. Replace them
2. Power indicator illuminates.
Heating plate is not hot!
Cause 1. The connections are loose
Solution 1. Fasten them again.
Cause 2. Electric heating tube has been burn.
Solution 2. Replace the heating tube.
3. Rice is not ripe or the cooking time is too long.
Cause 1. The pot has been deformed!
Solution 1. Adjust the pot to ensure a full contact with the heating plate.
Cause 2. The heating plate has been deformed
Solution 2. Use sand paper to polish for slight deform; send away to replace
if it is seriously deformed.
Cause 3. The pot slants, absorbing heat inefficiently.
Solution 3. Rotate the pot slightly to ensure full contact.
Cause 4. There are stains between the pot and the heatingplate.
Solution 4. Use 320#sand paper to clean.
4. Rice is scotched.
Cause 1. The cooking button or lever linkage does not work well.
Solution 1. Clear burn with pinchers or something.
Cause 2. Alnico thermal limitation fails.
Solution 2. Replace alnico thermal limitation.
5. Cannot keep warm automatically
Cause : The thermal stat fails
Solution : Replace the thermal stat
You can help protect the environment!
Please remember to respect the local regulations, hand in the
non-working electrical equipments to an appropriate waste
disposal center.
ENVIRONMENTAL DISPOSING
SCO 5019, SCO 5020 INSTRUCTION MANUAL

HOW TO OPERATE

- 12 -