Cleaning Method - Sinbo SS 4034 Manual De Instrucciones

Use Method 1
tighten the outer foil, otherwise the appliance can not work.
Use Method 2
(Pic 3)
4. Clothes with protrude fal-lals:Avoid the fal-lals (Pic 4)
5. The parts with patterns: Move along the pattern`s direction (Pic 5)
• Don`t take off the storeroom unless you clean it, otherwise it will hurt you or destroy
the appliance.
• Don`t use it to remove the lint in the stockings, otherwise the silk stocking will be drew
in the crucial point and maybe destroy the blade.

CLEANING METHOD

1. Take off the plastic cover, turn on the switch (Pic 1)
2. Move the appliance back and forth on the flat textures
(Pic 2)
• Put on the plastic cover after using.
• The appliance has the protective function, so you must
1. Turn off the switch (Pic 1)
2. Take out the storeroom along the
direction of arrow and clean it with
brush.(Pic 2)
3. Take out the outer foil toward to the
direction of arrow (Pic 3)
4. Take out the group blade (Pic 4)
5. Clean the outer foil with brush (Pic
5)
6. Clean the group blade with brush (Pic
6)
7. Clean the rotation shaft and lint on
the frame with brush (Pic 7)
- 7 -
1. The method of fast-remove, take
the frame in the small range,
removing to forth on the clothes (Pic
1)
2. Removing to the striking lint:
Moving on clothes vertically and
parallel (Pic 2)
3. The thin-texture clothes: Pile up
those clothes into two layers and
spread them out on the buck-board