First Time Usage; Hard Disk Formatting; Start Screen - Sveon SPremiere Serie Manual De Usuario

9. First time usage

Before using the device please read carefully these indications:
- Install the batteries inside the remote control.
- Connect the device to the TV (read the section 7 of this user guide).
- Connect the power adaptor to the power outlet.
- Put the power switch in ON position.
The frontal panel of the device includes buttons to manage basic operations and play your multimedia files:
- Press 5 6 buttons to move up and down the highlight.
- Press 34 buttons to access or exit from folders.
- Press OK button to confirm file or folder.
- Press STOP button to stop the playback.
- Press SETUP button to access to setup menu.

9.1 Hard disk formatting

The device hard disk is formatted by default. If you want to format it again please follow these steps:
1. Press "Setup" button of the remote control and in the option "System" choose "Format HDD".
2. Once the unit is selected, the next screen will appear (this
screen also appears when the inner hard disk is not format-
ted). Please note the format process will delete all the files
saved in the hard disk.
Use arrow buttons of the remote control to select "Accept"
and then press "OK" button to confirm.
3. Select "Format" option and press "OK" to confirm. Wait
until the formatting process finishes.
Important: Do not disconnect the device during this process.
It may cause serious damages in the device.
4. When the formatting proces finishes the next window ap-
pears. Press "Ok" button of the remote control.
The device is restarted automatically and then it is ready to
use.

9.2 Start screen

First time you use the device the following window appears
to setup different values of the device:
- OSD Language: Select the OSD language by default and
press "OK" button to confirm.
- Time: Enter the time.
- Wired LAN setup: Setup the network parameters if the de-
vice is connected through a network using a LAN cable. Se-
lect "IP DHCP Auto" option to setup the DHCP. Press
"Cancel" if the device is not connected to a network.
SPM3500 User guide
Index
1. Welcome
2. Features
3. System requirements
4. Content
5. Hardware
6. Remote control
6.1 Batteries installation
7. PC or laptop connection
8. TV Connections
8.1 AV Connection
8.2 HDMI Connection
9. First time usage
9.1 Hard disk formatting
9.2 Main screen
10. Main Menu
10.1 Videos
10.2 Music
10.3 Pictures
10.4 Copy
10.5 Settings
11. Basic operations
11.1 Music playback
11.2 Pictures playback
11.3 Video files playback
11.4 Files
11.5 Changing output resolution
12. Network functions
12.1 Wired LAN connectionada
12.2 Wireless LAN connection
13. Files sharing
13.1 Sharing files: Windows XP
13.2 Sharing files: Windows Vista
13.3 Sharing files: Windows 7
14. Files access through a network
14.1 My Shortcuts
15. Firmware upgrading
16. FAQs
English 28