Emerio SEW-122595.2 Manual De Instrucciones página 5

SEW-122595.2
PARTS IDENTIFICATION
1. Set screw for needle
2. Needle
3. Fastening plate
4. Tension control
5. Thread guide 2
6. Needle arm
7. Thread guide 1
8. On/off switch
9. Adapater input
10. Battery compartment
11. Rotary wheel
12. Bobbin
13. Extension spindle
14. Threader
Note: always use the rotary wheel to move needle arm. Never press or pull directly on the needle arm to
avoid damages to the internal mechanism.
On/off switch: (Fig. 1)
Slide to position A: ON
Slide to position B: OFF
INSTALL THE BATTERIES
1. Make sure the "On/off switch" is on the OFF position
2. Open the battery compartment cover.
3. Insert 4xAA batteries into the compartment and close the battery cover.
Caution:

To prevent the accidental start-up of the appliance, always make sure that the "on/off switch" is on the
OFF position when inserting or removing the batteries.

When using the adapter, remember to remove all batteries from the machine.
AC/DC ADAPTER (NOT INCLUDED)
Adapter must be 6V 800mA and must use plug with 1/8"/3.5 mm diameter. Plugging an adapter into a socket
that has different ratings could damage the socket and adapter.
(Fig. 1)
- 4 -
EN