Roney Power RPG 8-115 Manual De Instrucciones página 7

• If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect the
plug; never use the tool with a damaged cord
• Push spindle-lock button (4) only when spindle (1) is at a standstill
• Keep hands away from rotating accessories
• When grinding metal, sparks are generated; keep other persons and combustible material from work area
• In case of electrical or mechanical malfunction, immediately switch off the tool and disconnect the plug
• In case the cutting disc is blocked, resulting in jerking forces on the tool, immediately switch off the tool
• In case of current interruption or when the plug is accidentally pulled out, unlock the on/off switch (8)
immediately and put it in the OFF-position in order to prevent uncontrolled restarting
• Do not apply so much pressure on the tool that it comes to a standstill
AFTER USE
• Before you put down the tool, switch off the motor and ensure that all moving parts have come to a
complete standstill
• After switching off the tool, never stop the rotation of the accessory by a lateral force applied against it
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of the
plug
• If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left
unattended
Your machine is double insulated in accordance with EN 50144; therefore no earthwire is required.
MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the motor. Regularly
clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from
dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.
The machine requires no additional lubrication.
If a fault occur, e.g. after wear of a part, please contact your local dealer's service.
ENVIRONMENT PROTECTION
In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these materials to the appropriate recycling locations. Take
your unwanted machines to your local dealer. Here they will be disposed of in an environmentally safe way.
Discarded electric appliances are recyclable and should not be discarded in the domestic waste!
Please actively support us in conserving resources and protecting the environment by returning
this appliance to the collection centres (if available).
We declare under our sole responsibility that this product is in conformity with the following standards or
standardized documents:EN60745-1:2009;
2/A1:2001;EN61000-3-2:2006;EN61000-3-3/A2:2005; in accordance with the regulations 2006/42/ЕEС,
2006/95/ЕEС, 2004/108/ЕEС.
NOISE/VIBRATION Measured in accordance with EN60745 the sound pressure level of this tool is <92,8
dB(A) and the sound power level is <103,8dB(A) (standard deviation: 3 dB), and the vibration is <6,315
2
m/s ( main handle).
Meuleuse d'angle
INTRODUCTION
Cet outil sert au meulage, au tronçonnage et à l'ébarbage de pièces en métal et en pierre sans utiliser
d'eau; combiné avec des accessoires spécifiques, cet outil peut également servir au brossage et au
DECLARATION OF CONFORMITY
EN60745-2-3/A11:2009; EN55014-1:2006;EN55014-
7