DT SWISS R 535 ONE Manual De Instrucciones página 14

3. ASSEMBLY
The following information is important when the shock is used in a bicycle where it was not original
equipment. DT Swiss shocks from model year 2021 differ in the way they are allowed to be mounted
due to the bearings used.
3.1 MOUNTING SHOCKS WITH DU BUSHINGS
1
4
3
2
1
1 sleeve 2 DU pin 3 DU bushing 4 shock eye
The DU bushing (3) is already mounted on this shock. The mounting hardware (DU-Pin (2) and
sleeve (1)) suitable for your bicycle frame is available separately. Consult the manufacturer of your
bicycle frame for the correct dimensions of the hardware. For instructions on installing the mounting
hardware, refer to the Technical Manual for this shock at www.dtswiss.com.
There are no restrictions on the mounting position for this type.
14