Publicidad
Idiomas disponibles
Idiomas disponibles
Dear Customer!
Rodcraft Pneumatic Tools thanks you for the purchase of one of our products and invites you to read this user manual.
It contains all information required for the proper use of this device. We recommend you to read it completely and follow the given instructions carefully.
Please keep the user manual in a good condition. The contents of this manual may be updated without prior notice and without further obligations, so
that changes and improvements can be inserted into already distributed copies.
It is our goal to manufacture products, with which you can work as safely and efficiently as possible. For your own safety, it is vital that you exercise cauti-
on and good judgment in handling this product and other tools. These notes on safety contain some of the most important sources of danger; however,
they cannot cover all possible hazards.
Copying or translating any part of this manual is prohibited without the prior written permission of the manufacturer.
1. Technical Data (Fig. 01)
Technical data
Net weight
Unit
[kg]
MGN-2
2.4
MGN-3
2.9
MGN-5
3.8
MGN-8
5.8
MGN-12
6.7
MGN-20
9.1
MGN-30
18.3
MGN12F
9.5
MGN12L
5.9
MGN20F
13
MGN50L
35.3
Static coefficient test : 1.5 / Dynamic Coefficient test : 1.25
2. Application and Function
•
A Bottle jack is a device which you use for lifting a vehicle in order to ensure the accessibility for repair and maintenance work.
A Bottle jack is only a lifting device and must not be used for transportation or for loading of a vehicle.
•
•
Maneuvering under load is prohibited.
Please also mind the product safety information!
•
• No other use is permitted. For professional use only.
3. Inspection – Scope of delivery
Open the packing and check that the equipment has not been damaged in transit and that you received all the parts specified in the shipping documents.
Before bringing the equipment into service conduct a visual inspection in order to determine leaks, damages, loose or missing parts.
4. Assembly
Remove the device, including the enclosed items.
•
Assemble the two or three parts handle. (Fig.02(2)).
•
Now place the lever rod to the lifting device and place the lever rod into the support (Fig.02(1)).
•
Before using the Bottle jack it is necessary to purge the hydraulic circuit (see section 7)
•
5. Startup and operation
•
When operating the device, the safety guidelines must be taken strictly into account.
Please position the Bottle jack underneath the lifting points of the vehicle.
•
Make sure that no person stays in the vehicle that will be lifted. Turn off the engine and put on the handbrakes of the vehicle. Use wedges to prevent
•
the vehicle from moving (Fig.03(1)). Do not get into the vehicle and do not turn the engine on.
Never use the lifting jack in order to leave the car lifted. Always use chassis stands (Fig.03(5)).
•
•
Always position the lifting jack in such a way that it cannot be operated from underneath the car (Fig.03(4)).
•
Always make use of the vehicle manual in order to identify the correct lifting points of the vehicle.
Use the lever rod to bring the lifting device to the desired height (Fig.03 (2)). Make sure that the hydraulic valve is closed. For this purpose it is necessa-
•
ry to fasten the lever rod clockwise.
•
The lifting devices are provided with an overload valve, which has been adjusted by the manufacturer. This valve must never be readjusted.
In order to lower the load turn the lever rod slowly anticlockwise (Fig.02(2&3) & Fig.03(3)).
•
When not using the Bottle jack the piston / lifting arm must be pulled in.
•
6. Maintenance
• All moveable parts have to be greased regularly with standard multi-purpose grease. Always keep the equipment clean and away from aggressive chemi-
cals. Do not leave the equipment outdoor.
• When not using the Bottle jack the piston must be pulled in.
• A complete oil change is not necessary!
Please check the oil level at least once per year and conduct a refill, if required. Fill the cylinder with hydraulic oil up to the lower edge of the oil intake
screw. Please note that the piston has to be retracted (Fig.03(6)).
• Important: too much oil may put the equipment out of operation.
Lifting capacity
A
B
[kg]
[mm]
[mm]
2000
180
125
3000
190
135
5000
200
140
8000
200
120
12000
180
95
20000
185
95
30000
285
170
12000
240
150
12000
155
70
20000
275
170
50000
300
180
RODCRAFT PNEUMATIC TOOLS
EN
C
D
E
F
[mm]
[mm]
[mm]
[mm]
55
360
110
65
65
390
115
70
60
400
130
75
80
400
150
90
75
350
165
105
35
315
180
120
455
190
140
------
90
480
180
118
45
270
139
106
70
514
196
123
------
480
218
176
G [ø]
[mm]
20
23
29
35
43
53
62
43
43
53
66
6
Publicidad
