Warnings And Safety Precautions - Orion VBR0320 Manual Del Usuario

Warnings and Safety Precautions

The level probe should be installed as described in the product manual and the
applicable standards IEC 1000-5-1 , IEC 1000-5-2 , IEC 1131-4. During installation,
the source supplying power to the device should be isolated as specified in the
EN60204-1 Safety of Machinery standard, should be grounded from only one
side and both power inputs should be protected with Type T 1 A fuses and fitting
appropriate voltage protective varistors at the fuse outlets, should be considered.
It is the sole responsibility of the user to closely adhere to these installation
instructions and take all necessary set of measures accordingly. The user shall be
liable for any damage and loss occurring as a result of faulty mounting or installation
or use of the device for originally unintended purposes or in consequence of failure
on the part of the user to take the necessary set of safety measures.
10
Caution: Hot Surfaces !
Connect the Device with a Safety Ground
Connect the Device with a Protective Ground