Axis P3343 Guia De Instalacion página 6

Page 6
Install the Drop Ceiling Mount
1. If possible, remove the ceiling tile in which the drop ceiling mount is to be fitted.
2. Use the supplied template to mark the position for the 162mm (6.4") hole in the ceiling tile.
Remove the protective paper, fix to ceiling tile and cut around the template.
Notes:
• The combined weight of the camera and ceiling mount is 0.9kg (2.0lb). Check that the ceiling
material is strong enough to support this weight.
• The thickness of the ceiling tile should be 10-60mm (0.4" - 2.4").
Hole diameter 162mm/6.4"
3. For greater security, the camera can be secured using the supplied safety wire. Replace the
ceiling tile, and attach the end of the safety wire with the lock to a suitable point in the ceiling
above the drop ceiling.
Attach to ceiling
Drop Ceiling Mount Installation Guide
Ceiling tile