Axis P3343 Guia De Instalacion página 8

Page 8
6. Tighten the support arm screws using a torx 20 screwdriver head.
Support arm
screws
Notes:
• If your ceiling is not between 10-60mm (0.4" - 2.4"), or if you are not using the support arms, you
can also secure the ceiling bracket into place using the four alternate screw holes.
• If you do secure the drop ceiling mount using the alternate screw holes, use flat head screws to
secure the ceiling bracket, which will not interfer with attachment of the plastic dome cover.
When the support arm screws are tightened, the support arms fold out over the ceiling and lock
into place against the sides of the ceiling bracket to support and keep the drop ceiling mount in
place.
Drop Ceiling Mount Installation Guide
Support arms
Alternate screw
holes (4x)